C1 CRANE TICKET COURSE

Licence to Operate a Slewing Mobile Crane (Up to 100 tonnes) - TLILIC0021
Call to Book NowBook Online

Unit Name

TLILIC0021- Licence to operate a slewing mobile crane (Up to 100 tonnes)

Licence

C1

Course Duration

5 Days

Entry Requirement/s

Licence to Perform Dogging (DG – Company Policy)

A crane licence recognised in Australia (Company Policy)

 

Course Cost*

Full price: $2990.00

CSQ funded price: $1380.00

C1 Crane Ticket Training – train with our 8 crane fleet

This course is designed to ensure that participants have the skills and knowledge required to operate a slewing mobile crane (up to 100 tonnes) for licensing purposes. It encompasses the requirement for non-slewing mobile crane licence and the vehicle loading crane licence.

Please note, that this is not a course that we regularly schedule. We do schedule ‘Licence to Operate a Slewing Mobile Crane (up to an over 100 tonnes capacity)‘ courses every 2 weeks as a suitable alternative though.  Click the link or call for more information call 07 38076061

CSQ Provider Logo
NRT high risk work licence logo

TLILIC0021 - Licence to Operate a Slewing Mobile Crane (up to 100 tonnes)

C1 Crane Ticket Course Overview:

This course requires the operator to plan the work, conduct routine checks, set up crane, transfer loads, mobile loads and shut down and secure the crane.

Competence in this unit, does not in itself result in a High-Risk Work Licence to operate this plant. A student must successfully complete the National Assessment Instrument (NAI) (which is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit) and be issued with a CAS .

On successful completion of this course, participants will be able to apply for a High-Risk Work Slewing Mobile Crane up to 100 tonnes (C1) Licence. There are costs associated with applying for the licence. Please visit www.worksafe.qld.gov.au for current licence fees.

C1 Licence Application

This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) up to 100 tonnes, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a High-Risk Work Licence (HRWL) to operate this plant.

Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include:

  • A front-end loader or
  • A backhoe or
  • An excavator or
  • Other earth moving equipment, when configured for crane operation.

A person performing this work is required to hold a slewing mobile crane with an MRC up to 100 tonnes HRWL.


Further Information is available on the following links:

Performance Criteria

  • Plan work
  • Conduct routine checks
  • Set up crane
  • Transfer load
  • Mobile load
  • Shut down and secure crane

C1 Crane Course Outline

  • Operate a slewing mobile crane (up to 100t capacity) for the lifting and moving of loads to the safe working rated capacity in conjunction with other associated personnel
  • Apply risk assessment and hazard control strategies
  • Use and interpret crane manufacturer's specifications and data, including load charts, to enable the crane to be configured for the load
  • Verify problems and equipment faults and demonstrate appropriate response procedures
  • Appropriate mathematical procedures for estimation and measurement of loads
  • WHS legislation, standards and codes of practice relevant to the full range of processes for the crane class
  • Mobile slewing crane characteristics and capabilities to allow the configuration of the crane to suit the range of loads
  • Understanding of the hierarchy of hazard identification and control
  • Organisational and workplace standards, requirements, policies and procedures for conducting operations for the crane class
  • Procedures for the recording, reporting and maintenance of workplace records and information
  • Rated capacity and working load limits (including use of crane load charts)
  • Typical routine problems encountered in the process and with equipment and adjustments required for correction

Licensing/ Regulatory Information

Legislative and regulatory requirements are applicable to this unit of competency.

This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth, State and Territory HRWL requirements.

The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.

Pre-requisite For This Course

What to Bring

  • Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
  • Steel cap Boots
  • Safety gloves
  • Hi-Visibility shirt and hard hat with a brim
  • Suitable outdoor work clothing (no singlets)
  • Lunch and water bottle
  • If applicable, any evidence of prior experience e.g old certificates
  • USI Number (Find My USI)

Additional Information

Course Timing:Course days typically run from 6:30am to approximately 3:00pm - Participants are advised to arrive 15 minutes early to sign in.

*You may be required to start before 6:30am and stay after 3:00pm depending on how long the formal assessment runs for, we will advise of these times on the day of formal assessment.

Course Structure:
Please note: Competence in a unit does not in itself result in a licence.

Once the trainer believes the participant has demonstrated theoretical and practical understanding of the chosen course (i.e ‘Unit of Competency’), this will be verified with a certificate or what’s known as a ‘Statement of Attainment’ from us, On the Job Training.

In order to obtain a licence, the candidate, after successful completion of the unit of competency, can choose to participate in the theoretical and practical assessments known as ‘National Assessment Instruments’ (NAI) held at the conclusion of each course at On the Job Training. This is conducted by an assessor on behalf of Workplace Health & Safety Queensland. On successful completion of the mandated assessments, they will be issued with a ‘Candidate Assessment Summary’ (CAS) by On the Job Training.

Upon successful completion of the NAI as stated above, the Office of Industrial Relations Queensland will contact them with instructions on how to apply for the high risk work licence.

For more information about costs associated with the chosen licence visit the Workplace Health & Safety website.

FEATURED CONTENT

Crane Ticket Training Video

Why not check out some of our training videos to learn more or get a feel for what to expect with our training.

 

C0 Crane Ticket Legislation Changes

C0 Crane Ticket: Revised changes to crane HRW units and what it means

In early 2022, some significant changes to legislation were made to prerequisites for undertaking slewing mobile crane licenced courses. Read what they are and our company stance on it in our blog here.

TESTIMONIALS

Great experience, easy to understand and comprehend information being related by the trainer. Stress free learning and training environment. Would recommend to anyone seeking thier high risk work license. Shane and Bruce made the experience enjoyable and easy to get through.

Ryhs Bryden

Dogging (DG), AAM Group

Trainers were excellent and extremely helpful communicating their experiences and ways of doing things and teaching the correct way! I am 100% satisfied and would definitely recommend for your training!! Thanks guys!!
 
 
Luke Hines

Dogging (DG), Pensar

I had an absolutely outstanding experience with the entire cew at OTJT.
Very professional and excellent range of experience and skills.

I can reccommend OTJT for having the ability of imparting a great deal of knowledge that will stay with me for the rest of my life. Well done team.

Juan Boulter

Contact Us

 

 

Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.

 

 

Phone: 07 3807 6061

Email: admin@onthejobtraining.edu.au

Address: 79 Christensen Road, Stapylton QLD 4207

Usual Business Hours: Mon - Fri 6.30AM - 5:00PM

Enquiry Form