INTERMEDIATE RIGGING COURSE

 

 

Call to Book Now Book Online Course Calendar
 
 

Course Information

Unit Name

CPCCLRG3002 - Licence to perform rigging intermediate level

Licence

RI

Course Cost

$1950.00

Course Duration

5 Days

Entry Requirement/s

RB - Licence to perform rigging basic level

 

Course Overview

 

This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

This unit requires the applicant to be able plan the work, select and inspect equipment, set up task, erect structures and plant and dismantle structures and plant.

Please note: That this course has a pre-requisite requirement that participants hold the unit CPCCLRG3001 - Licence to perform rigging basic level or holding a valid licence for basic rigging. Participants will have to provide a copy of their Statement of Attainment or their High-Risk licence as evidence.

This course is based upon the National Standard for Licensing Persons Performing High Risk Work.

This course option is suitable for participants without access to a workplace to gain experience, or workplaces who don’t have the resources to supervise staff while gaining nominal hours. If at any time during the course the assessor recognises the need for the participant to complete gap training, participants will be given their logbook to gain nominal hours in the workplace prior to attending an assessment.

On successful completion of this course, participants will be able to apply for a High-Risk Work Rigger Intermediate Licence. There are costs associated with applying for the licence. Please visit www.worksafe.qld.gov.au for current licence fees.

Application

 

This unit specifies the skills and knowledge required to safely perform intermediate rigging work.

Riggers use mechanical load shifting equipment and associated gear to move, place or secure loads, including plant, equipment or members of a building or structure. Riggers ensure the stability of those members and set up and dismantle cranes and hoists.

This unit includes rigging work involving:

  • Hoists with jibs and self-climbing hoists
  • Cranes, conveyors, dredges and excavators
  • Tilt slabs
  • Demolition of structures or plant
  • Multiple lifts.

Rigging work is undertaken in construction and other industries where load shifting equipment is used to move, place or secure loads.

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 - Prepare to work safely in the construction industry meets this requirement.

Competence in this unit does not in itself result in a licence. A licence is obtained after competence is assessed under applicable Commonwealth, state or territory work health and safety (WHS) regulations.


Further Information is available on the following links:

 

Performance Criteria

 
  • Plan job
  • Select and inspect equipment
  • Prepare site and equipment
  • Erect structures and plant
  • Dismantle structures and plant

Pre-requisite For This Course

 

What to Bring

 
  • Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
  • Steel cap Boots
  • Safety gloves
  • Hi-Visibility shirt and hard hat with a brim
  • Suitable outdoor work clothing (no singlets)
  • Lunch and water bottle
  • If applicable, any evidence of prior experience e.g old certificates
  • USI Number (Find My USI)

Additional Information

Course Timing:

Course days typically run from 6:30am to approximately 3:00pm - Participants are advised to arrive 15 minutes early to sign in.

*You may be required to start before 6:30am and stay after 3:00pm depending on how long the formal assessment runs for, we will advise of these times on the day of formal assessment.


Course Structure:
Please note: Competence in a unit does not in itself result in a licence.

Once the trainer believes the participant has demonstrated theoretical and practical understanding of the chosen course (i.e ‘Unit of Competency’), this will be verified with a certificate or what’s known as a ‘Statement of Attainment’ from us, On the Job Training.

They then begin the process of obtaining a licence, via the relevant practical and theoretical assessments or ‘National Assessment Instruments’ (NAI). This is conducted by an assessor on behalf of Workplace Health & Safety Queensland. On successful completion of the mandated assessment, they will be issued with a ‘Candidate Assessment Summary’ (CAS) by On the Job Training.

Upon successful completion of the NAI as stated above, the Office of Industrial Relations Queensland will contact them with instructions on how to apply for the high risk work licence.

For more information about costs associated with the chosen licence visit the Workplace Health & Safety website.
 
 
Nationally Recognised Training Logo

Upcoming Courses

 
NameCost
CPCCLRG3002 Intermediate Rigging$1,950.00Book Me In!
NameCost
CPCCLRG3002 Intermediate Rigging - CSQ Funded$643.00Book Me In!

Related Blogs

Useful information to support your research

On the Job Training Sunrise

Benefits of Comprehensive C6 Crane Ticket Training

Through hands-on, fundamental and basis training with a variety of cranes (including slew and non-slew), more comprehensive C6 crane ticket training benefits students with:

  1. Better understanding of safer mobile crane operation through experience
  2. Crane operator employment appeal through versatility
  3. Informed and practical understanding of specific crane types to conduct inspections and general maintenance

Read More

 

Train with our 8 Cranes for your Next Crane Licence

  Say hello to our 8 (not so) little friends:

  1. ‘OLD FAITHFUL’ – 3T Truck Mounted Slew Crane
  2. ‘SQUIRT’ – 7T City Class Crane
  3. ‘THE BLUE BULLET’ – 14T Non-Slew Crane
  4. ‘THE RED RASH’ 20T Rough Terrain Crane
  5. ‘LUCY’ – 25T Truck Mounted Slew Crane
  6. ‘BLACK BETTY’ – 50T Lattice Boom Crawler Crane
  7. ‘HULK’ – 5T Tower Crane
  8. ‘JESSIE’ – 4T Self-erecting Tower Crane

Read More

Black Betty Fushun QUY50 Black Lattice Crawler Crane

4 Things to Consider when Operating a Crawler Crane

Our operating a crawler crane considerations in a nutshell:

  1. Allow adequate slew clearances from hazards
  2. Don’t rely on any hoist/luff limits
  3. Operate mobile cranes in a controlled manner as per the crane manufacturer’s specifications
  4. Control risks when mobiling ie. Swinging load/hook, in motion forces, mobiling within specification

Read More

Contact Us

 

 

Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.

Phone: 07 5502 8331

Email: admin@onthejobtraining.edu.au

Address: 79 Christensen Road, Stapylton QLD 4207

Usual Business Hours: Mon - Fri 7:00AM - 9:00PM

Enquiry Form