Course Information
Unit Name
RIIMPO317F - Conduct roller operations
Course Cost
$900.00
Course Duration
1 Day
Entry Requirement/s
NIL
- 01 - Application
- 02 - Performance Criteria
- 03 - Course Outline
- 04 - Pre-requisite For This Course
- 05 - What to Bring
- 06 - Additional Information
Application
This unit describes the skills and knowledge required to operate a roller to compact material.
This unit applies to those working in site based roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.
This unit alone does not provide sufficient skill to independently load and unload equipment. To perform this activity safely, personnel must either complete or be assisting someone who has completed RIIHAN308F Load and unload plant or equivalent.
Further Information is available on the following links:
Performance Criteria
- Plan and prepare for roller operations
- Operate roller in line with established requirements
- Prepare to relocate the roller
- Conduct housekeeping activities
Course Outline
- OHS and legislative obligations
- Identify work requirements, procedures and instructions
- Plan and prepare for roller operations
- Conduct roller pre-operational checks
- Operate roller
- Relocate the roller
- Carry out machine operator maintenance
- Clean-up work area
Pre-requisite For This Course
- Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
- Ability to read, write & understand English
What to Bring
- Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
- Steel cap Boots
- Safety gloves
- Hi-Visibility shirt and hard hat with a brim
- Suitable outdoor work clothing (no singlets)
- Lunch and water bottle
- If applicable, any evidence of prior experience e.g old certificates
- USI Number (Find My USI)
Additional Information
Course days typically run from 6.30am to approximately 3.00pm - Participants are advised to arrive 15 minutes early to sign in.
*You may be required to start before 6.30am and stay after 3.00pm depending on how long the formal assessment runs for, we will advise of these times on the day of formal assessment.
Upcoming Courses
There are No Upcoming Courses
Related Blogs
Useful information to support your research
Benefits of Comprehensive C6 Crane Ticket Training
Through hands-on, fundamental and basis training with a variety of cranes (including slew and non-slew), more comprehensive C6 crane ticket training benefits students with:
- Better understanding of safer mobile crane operation through experience
- Crane operator employment appeal through versatility
- Informed and practical understanding of specific crane types to conduct inspections and general maintenance
Train with our 8 Cranes for your Next Crane Licence
Say hello to our 8 (not so) little friends:
- ‘OLD FAITHFUL’ – 3T Truck Mounted Slew Crane
- ‘SQUIRT’ – 7T City Class Crane
- ‘THE BLUE BULLET’ – 14T Non-Slew Crane
- ‘THE RED RASH’ 20T Rough Terrain Crane
- ‘LUCY’ – 25T Truck Mounted Slew Crane
- ‘BLACK BETTY’ – 50T Lattice Boom Crawler Crane
- ‘HULK’ – 5T Tower Crane
- ‘JESSIE’ – 4T Self-erecting Tower Crane
4 Things to Consider when Operating a Crawler Crane
Our operating a crawler crane considerations in a nutshell:
- Allow adequate slew clearances from hazards
- Don’t rely on any hoist/luff limits
- Operate mobile cranes in a controlled manner as per the crane manufacturer’s specifications
- Control risks when mobiling ie. Swinging load/hook, in motion forces, mobiling within specification
Contact Us
Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.
Phone: 07 5502 8331
Email: admin@onthejobtraining.edu.au
Address: 79 Christensen Road, Stapylton QLD 4207
Usual Business Hours: Mon - Fri 7:00AM - 9:00PM