Courses every Thurs & Fri at Stapylton, between the Gold Coast & Brisbane


CSQ Logo longOn the Job Training Phone Number Icon 500x200

Course CalendarCourse Packages

Unit Name

RIIMPO317F – Conduct roller operations

Course Duration

1 Day

Entry Requirement/s


Course Cost*

Full price: $990.00

CSQ funded price: $490.00

Ready to Book?

On the Job Training Phone Number Icon Trans 1000x200 V2

Roller Ticket Training, accessible from the Gold Coast and Brisbane

Why get a roller ticket? According to the 2022 Major Project Pipeline Report, there is $71 billion worth of project infrastructure work planned in the next 5 years in Queensland alone.  That is going to require moving a lot of dirt!  Much of this work is being conducted in SEQ, with projects such as the GC Light Rail extension and the Coomera Connector.

This handy 1 day roller course, is designed to ensure that participants have the skills and knowledge required to conduct roller operations.  Learn in a simulated construction site but a controlled environment, at our training yard at Stapylton. Off the M1, Yatala North exit halfway between the Gold Coast and Brisbane near the end of the Logan Motorway.

CSQ Provider Logo
Queensland Training Awards Nominee Logo V2_1
NRT high risk work licence logo

Want to be competent in a variety of plant? Take advantage of our civil course combo!

Excavator, skid steer, front end loader, integrated tool carrier, telehandler & roller courses available


Civil Course Combo Deals:

  • CSQ Eligible students: 3 courses for $470 (or $485-$490 per course)
  • Non-funded: 3 courses for the price of 2 - $1980 (or $990 per course or $690 for Telehandler)

Courses run every Thursday afternoon (1-5pm) and Fridays (6.30am-3pm)

Online BookingCall to Enquire

Conduct Roller Operations - RIIMPO317F

Roller Ticket Course Overview

This roller training course overview describes the skills and knowledge required to operate a roller to compact material.

This unit applies to those working in site based roles.

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.  In Queensland, there is no licensing requirement to operate a roller. As such competence in this unit (code RIIMPO317F) will allow a competent person to operate a roller in Queensland. Upon successful completion of this unit, the participant will receive a Statement of Attainment and a card issued by On the Job Training (RTO 70023) to prove competence on sites.

This unit alone does not provide sufficient skill to independently load and unload equipment. To perform this activity safely, personnel must either complete or be assisting someone who has completed RIIHAN308F Load and unload plant or equivalent.

Further Information is available on the following links:

Performance Criteria

  • Plan and prepare for roller operations
  • Operate roller in line with established requirements
  • Prepare to relocate the roller
  • Conduct housekeeping activities

Roller Training Course Outline

  • OHS and legislative obligations
  • Identify work requirements, procedures and instructions
  • Plan and prepare for roller operations
  • Conduct roller pre-operational checks
  • Operate roller
  • Relocate the roller
  • Carry out machine operator maintenance
  • Clean-up work area

Pre-requisite For This Course

What to Bring

  • Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
  • Steel cap Boots
  • Safety gloves
  • Hi-Visibility shirt and hard hat with a brim
  • Suitable outdoor work clothing (no singlets)
  • Lunch and water bottle
  • If applicable, any evidence of prior experience e.g old certificates
  • USI Number (Find My USI)

Additional Information

Course days typically run from 6.30am to approximately 3.00pm - Participants are advised to arrive 15 minutes early to sign in.

*Please note you may be required to start before 6.30am and stay after 3.00pm depending on course timings.


Training Videos

Why not check out some of our training videos to learn more or get a feel for what to expect with our training.


Brandon Rhea Tower Crane Dogman Dream Featured IMage

Tower Crane Dream: How a Bricklayer Became a Dogman

Sometimes you meet that special student, who you can immediately sense as a trainer that they are not only here to learn; they are metaphorically wearing their career goals on their sleeve. Read about Rhea’s inspiring story here.


Great experience, easy to understand and comprehend information being related by the trainer. Stress free learning and training environment. Would recommend to anyone seeking thier high risk work license. Shane and Bruce made the experience enjoyable and easy to get through.

Ryhs Bryden

Dogging (DG), AAM Group

Trainers were excellent and extremely helpful communicating their experiences and ways of doing things and teaching the correct way! I am 100% satisfied and would definitely recommend for your training!! Thanks guys!!
Luke Hines

Dogging (DG), Pensar

I had an absolutely outstanding experience with the entire cew at OTJT.
Very professional and excellent range of experience and skills.

I can reccommend OTJT for having the ability of imparting a great deal of knowledge that will stay with me for the rest of my life. Well done team.

Juan Boulter

Contact Us



Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.



Phone: 07 3807 6061


Address: 79 Christensen Road, Stapylton QLD 4207

Usual Business Hours: Mon - Fri 6.30AM - 5:00PM

Enquiry Form