SKID STEER TICKET (aka Bobcat) COURSE
Courses every Thurs & Fri at Stapylton, between the Gold Coast & Brisbane
Unit Name
RIIMPO318F – Conduct civil construction skid steer loader operations
Course Duration
1 Day
Entry Requirement/s
None
Course Cost*
Full price: $990.00
CSQ funded price: $485.00
Ready to Book?
Skid Steer (aka Bobcat) Ticket Training, accessible from the Gold Coast and Brisbane
Why get a skid steer ticket? According to the 2022 Major Project Pipeline Report, there is $71 billion worth of project infrastructure work planned in the next 5 years in Queensland alone. That is going to require moving a lot of dirt! Much of this work is being conducted in SEQ, with projects such as the GC Light Rail extension and the Coomera Connector.
This handy 1 day skid steer course, sometimes referred to as a ‘Bobcat’, a popular manufacturer, is designed to ensure that participants have the skills and knowledge required to conduct skid steer loader operations. Learn in a simulated construction site but a controlled environment, at our training yard at Stapylton. Off the M1, Yatala North exit halfway between the Gold Coast and Brisbane near the end of the Logan Motorway.
Want to be competent in a variety of plant? Take advantage of our civil course combo!
Excavator, skid steer, front end loader, integrated tool carrier, telehandler & roller courses available
Civil Course Combo Deals:
- CSQ Eligible students: 3 courses for $470 (or $485-$490 per course)
- Non-funded: 3 courses for $1650 (or $990 per course or $690 for Telehandler)
Courses run every Thursday afternoon (1-5pm) and Fridays (6.30am-3pm)
Conduct Civil Construction Skid Steer Loader Operations - RIIMPO318F
Skid Steer Ticket Course Overview
This skid steer course overview describes the skills and knowledge required operate a skid steer loader to load, haul and distribute materials.
This unit applies to those working in site based roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit. In Queensland, there is no licensing requirement to operate a skid steer. As such competence in this unit (code RIIMPO318F) will allow a competent person to operate a skid steer in Queensland. Upon successful completion of this unit, the participant will receive a Statement of Attainment and a card issued by On the Job Training (RTO 70023) to prove competence on sites.
This unit alone does not provide sufficient skill to independently load and unload equipment. To perform this activity safely, personnel must either complete or be assisting someone who has completed RIIHAN308F Load and unload plant or equivalent.
Further Information is available on the following links:
Performance Criteria
- Plan and prepare for skid steer loader operations
- Operate skid steer in line with established requirements
- Load, carry and place materials to complete work activity
- Select, remove, fit and use attachments for a skid steer loader
- Prepare to relocate the skid steer loader
- Conduct housekeeping activities
Skid Steer Training Course Outline
- OHS and legislative obligations
- Identify work requirements, procedures and instructions
- Plan and prepare for skid steer loader operations
- Conduct skid steer loader pre-operational checks
- Operate skid steer loader
- Attach, secure, lift, carry and place materials
- Select, remove and fit attachments
- Relocate the skid steer loader
- Carry out machine operator maintenance
- Clean-up work area
Pre-requisite For This Course
- Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
- Ability to read, write & understand English
What to Bring
- Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
- Steel cap Boots
- Safety gloves
- Hi-Visibility shirt and hard hat with a brim
- Suitable outdoor work clothing (no singlets)
- Lunch and water bottle
- If applicable, any evidence of prior experience e.g old certificates
- USI Number (Find My USI)
Additional Information
Course days typically run from 6.30am to approximately 3.00pm - Participants are advised to arrive 15 minutes early to sign in.
*Please note you may be required to start before 6.30am and stay after 3.00pm depending on course timings.
FEATURED CONTENT
Training Videos
Why not check out some of our training videos to learn more or get a feel for what to expect with our training.
Tower Crane Dream: How a Bricklayer Became a Dogman
Sometimes you meet that special student, who you can immediately sense as a trainer that they are not only here to learn; they are metaphorically wearing their career goals on their sleeve. Read about Rhea’s inspiring story here.
TESTIMONIALS
Great experience, easy to understand and comprehend information being related by the trainer. Stress free learning and training environment. Would recommend to anyone seeking thier high risk work license. Shane and Bruce made the experience enjoyable and easy to get through.
I had an absolutely outstanding experience with the entire cew at OTJT.
Very professional and excellent range of experience and skills.
I can reccommend OTJT for having the ability of imparting a great deal of knowledge that will stay with me for the rest of my life. Well done team.
Contact Us
Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.
Phone: 07 3807 6061
Email: admin@onthejobtraining.edu.au
Address: 79 Christensen Road, Stapylton QLD 4207
Usual Business Hours: Mon - Fri 6.30AM - 5:00PM