SLEWING MOBILE CRANE LICENCE (C0)

Operate Slewing and Non-slewing Mobile Cranes over 100 Tonnes

 

 

Call to Book Now Check Availability Enquiry Form
 
 

Course Information

Course Code

TLILIC0008

Course Cost

$2450.00

Course Duration

5 Days

RTO Provider

On the Job Training (RTO 70023)

Entry Requirement/s

DG – Licence to Perform Dogging

C1 – Slewing Mobile Crane Licence

 

Course Overview


This course requires the operator to plan the work, conduct routine checks, set up crane, transfer loads, mobile loads and shut down and secure the crane.

Competence in this unit, does not in itself result in a High-Risk Work Licence to operate this plant. A student must successfully complete the National Assessment Instrument (NAI) (which is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit) and be issued with an AS1.

On successful completion of this course, participants will be able to apply for a High-Risk Work Slewing Mobile Crane over 100 tonnes (C0) Licence. There are costs associated with applying for the licence. Please visit www.worksafe.qld.gov.au for current licence fees.

Application


This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) over 100 tonnes, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a High-Risk Work Licence (HRWL) to operate this plant.

A person undertaking this unit must hold:

  • A current National HRWL to perform dogging or a current certification for a specific VET course for HRWL to perform dogging that has been issued by, or on behalf of a WHS Regulator
  • A current National HRWL to operate a Slewing Mobile crane (up to 60 Tonnes), and current industry experience operating a slewing mobile crane of greater than 20t and up to 60t competently for at least 2 years.

Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include:

  • A front-end loader or
  • A backhoe or
  • An excavator or
  • Other earth moving equipment, when configured for crane operation.

A person performing this work is required to hold a slewing mobile crane with an MRC over 100 tonnes HRWL.


Further Information is available on the following links:


Performance Criteria


Course Outline


  • Operate a slewing mobile crane (over 100t capacity) for the lifting and moving of loads to the safe working rated capacity in conjunction with other associated personnel
  • Apply risk assessment and hazard control strategies
  • Use and interpret crane manufacturer's specifications and data, including load charts, to enable the crane to be configured for the load
  • Verify problems and equipment faults and demonstrate appropriate response procedures
  • Appropriate mathematical procedures for estimation and measurement of loads
  • WHS legislation, standards and codes of practice relevant to the full range of processes for the crane class
  • Mobile slewing crane characteristics and capabilities to allow the configuration of the crane to suit the range of loads
  • Understanding of the hierarchy of hazard identification and control
  • Organisational and workplace standards, requirements, policies and procedures for conducting operations for the crane class
  • Procedures for the recording, reporting and maintenance of workplace records and information
  • Rated capacity and working load limits (including use of crane load charts)
  • Typical routine problems encountered in the process and with equipment and adjustments required for correction

Licensing/ Regulatory Information


Legislative and regulatory requirements are applicable to this unit of competency.

This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth, State and Territory HRWL requirements.

The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.

Pre-requisite For This Course


What to Bring


  • Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
  • Steel cap Boots
  • Safety gloves
  • Hi-Visibility shirt and hard hat with a brim
  • Suitable outdoor work clothing (no singlets)
  • Lunch and water bottle
  • If applicable, any evidence of prior experience e.g old certificates
  • USI Number (Find My USI)

Additional Information


Course days typically run from 7:00am to approximately 3:30pm - Participants are advised to arrive 15 minutes early to sign in.

*You may be required to start before 7:00am and stay after 3:30pm depending on how long the formal assessment runs for, we will advise of these times on the day of formal assessment.

 
Nationally Recognised Training Logo

Upcoming Courses

Name Cost
TLILIC0015 Slew Crane Open $2,450.00
Name Cost
TLILIC0015 Slew Crane Open - CSQ Funded $840.00

Related Blogs

Useful information to support your research

On the Job Training Sunrise

Benefits of Comprehensive C6 Crane Ticket Training

Through hands-on, fundamental and basis training with a variety of cranes (including slew and non-slew), more comprehensive C6 crane ticket training benefits students with:

  1. Better understanding of safer mobile crane operation through experience
  2. Crane operator employment appeal through versatility
  3. Informed and practical understanding of specific crane types to conduct inspections and general maintenance

Read More

 

Train with our 8 Cranes for your Next Crane Licence

  Say hello to our 8 (not so) little friends:

  1. ‘OLD FAITHFUL’ – 3T Truck Mounted Slew Crane
  2. ‘SQUIRT’ – 7T City Class Crane
  3. ‘THE BLUE BULLET’ – 14T Non-Slew Crane
  4. ‘THE RED RASH’ 20T Rough Terrain Crane
  5. ‘LUCY’ – 25T Truck Mounted Slew Crane
  6. ‘BLACK BETTY’ – 50T Lattice Boom Crawler Crane
  7. ‘HULK’ – 5T Tower Crane
  8. ‘JESSIE’ – 4T Self-erecting Tower Crane

Read More

Black Betty Fushun QUY50 Black Lattice Crawler Crane

4 Things to Consider when Operating a Crawler Crane

Our operating a crawler crane considerations in a nutshell:

  1. Allow adequate slew clearances from hazards
  2. Don’t rely on any hoist/luff limits
  3. Operate mobile cranes in a controlled manner as per the crane manufacturer’s specifications
  4. Control risks when mobiling ie. Swinging load/hook, in motion forces, mobiling within specification

Read More

Contact Us

Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.

Phone: 07 5502 8331

After hours: 0404 709 861

Email: admin@onthejobtraining.edu.au

Address: 79 Christensen Road, Stapylton QLD 4207

Usual Business Hours: Mon - Fri 7:00AM - 9:00PM

Enquiry Form