VEHICLE LOADING CRANE COURSE

 

 

Call to Book Now Book Online Course Calendar
 
 

Course Information

Unit Name

TLILIC0024- Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)

Licence

CV

Course Cost

$1950.00

Course Duration

5 Days

Entry Requirement/s

DG - Licence to perform dogging

 

Course Overview

 

This course requires the operator to plan the work, conduct routine checks, set up crane, transfer loads, mobile loads and shut down and secure the crane.

Competence in this unit, does not in itself result in a High-Risk Work Licence to operate this plant. A student must successfully complete the National Assessment Instrument (NAI)(which is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit) and be issued with a CAS.

This course is offered to corporate clients for a group of students. We do not currently offer this course to individuals as part of our public course offering.

Application

 

This unit specifies the skills and knowledge required to safely operate a vehicle loading crane with a Maximum Rated Capacity (MRC) of 10 metre tonnes or more. Competence in this unit, does not in itself result in a High-Risk Work Licence (HRWL) to operate this plant.

Vehicle loading crane means a crane mounted on a vehicle for loading and unloading the vehicle.

A person performing this work is required to hold a vehicle loading crane HRWL.


Further Information is available on the following links:

 

Performance Criteria

 
  • Conduct routine checks
  • Set up crane
  • Transfer loads
  • Shut down and secure crane

Course Outline

 
  • Operate a vehicle loading crane
  • Use of lifting equipment and basic slinging techniques suitable for the loads to be loaded/unloaded as defined by workplace procedures
  • Apply risk assessment and hazard control strategies
  • Use and interpret crane manufacturer's specifications and data
  • Verify problems and equipment faults and demonstrate appropriate response procedures
  • Appropriate mathematical procedures for estimation of loads
  • Assessment of ground conditions
  • Awareness of the boom/jib movements
  • WHS legislation, standards and codes of practice
  • Use of lifting equipment and basic slinging techniques suitable for the loads to be loaded/unloaded as defined by workplace procedures
  • Understanding of the hierarchy of hazard identification and control
  • Organisational and workplace standards, requirements, policies and procedures
  • Procedures for the recording, reporting and maintenance of workplace records and information
  • Typical routine problems encountered in the process and with equipment and adjustments required for correction
  • Crane characteristics and capabilities

Licensing/ Regulatory Information

 

Legislative and regulatory requirements are applicable to this unit of competency.

This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth, State and Territory HRWL requirements.

The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.

Pre-requisite For This Course

 

What to Bring

 
  • Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
  • Steel cap Boots
  • Safety gloves
  • Hi-Visibility shirt and hard hat with a brim
  • Suitable outdoor work clothing (no singlets)
  • Lunch and water bottle
  • If applicable, any evidence of prior experience e.g old certificates
  • USI Number (Find My USI)

Additional Information

Course Timing:

Course days typically run from 6:30am to approximately 3:00pm - Participants are advised to arrive 15 minutes early to sign in.

*You may be required to start before 6:30am and stay after 3:00pm depending on how long the formal assessment runs for, we will advise of these times on the day of formal assessment.


Course Structure:
Please note: Competence in a unit does not in itself result in a licence.

Once the trainer believes the participant has demonstrated theoretical and practical understanding of the chosen course (i.e ‘Unit of Competency’), this will be verified with a certificate or what’s known as a ‘Statement of Attainment’ from us, On the Job Training.

In order to obtain a licence, the candidate, after successful completion of the unit of competency, can choose to participate in the theoretical and practical assessments known as ‘National Assessment Instruments’ (NAI) held at the conclusion of each course at On the Job Training. This is conducted by an assessor on behalf of Workplace Health & Safety Queensland. On successful completion of the mandated assessments, they will be issued with a ‘Candidate Assessment Summary’ (CAS) by On the Job Training.

Upon successful completion of the NAI as stated above, the Office of Industrial Relations Queensland will contact them with instructions on how to apply for the high risk work licence.

For more information about costs associated with the chosen licence visit the Workplace Health & Safety website.
 
 
Nationally Recognised Training Logo

Upcoming Courses

 
NameCost
TLILIC0024 CV Vehicle Loading Crane$1,950.00Book Me In!
NameCost
TLILIC0024 CV Vehicle Loading Crane - CSQ Funded$548.00Book Me In!
NameCost
TLILIC0024 CV Vehicle Loading Crane 22/23$1,950.00Book Me In!

Related Blogs

Useful information to support your research

On the Job Training Sunrise

Benefits of Comprehensive C6 Crane Ticket Training

Through hands-on, fundamental and basis training with a variety of cranes (including slew and non-slew), more comprehensive C6 crane ticket training benefits students with:

  1. Better understanding of safer mobile crane operation through experience
  2. Crane operator employment appeal through versatility
  3. Informed and practical understanding of specific crane types to conduct inspections and general maintenance

Read More

 

Train with our 8 Cranes for your Next Crane Licence

  Say hello to our 8 (not so) little friends:

  1. ‘OLD FAITHFUL’ – 3T Truck Mounted Slew Crane
  2. ‘SQUIRT’ – 7T City Class Crane
  3. ‘THE BLUE BULLET’ – 14T Non-Slew Crane
  4. ‘THE RED RASH’ 20T Rough Terrain Crane
  5. ‘LUCY’ – 25T Truck Mounted Slew Crane
  6. ‘BLACK BETTY’ – 50T Lattice Boom Crawler Crane
  7. ‘HULK’ – 5T Tower Crane
  8. ‘JESSIE’ – 4T Self-erecting Tower Crane

Read More

Black Betty Fushun QUY50 Black Lattice Crawler Crane

4 Things to Consider when Operating a Crawler Crane

Our operating a crawler crane considerations in a nutshell:

  1. Allow adequate slew clearances from hazards
  2. Don’t rely on any hoist/luff limits
  3. Operate mobile cranes in a controlled manner as per the crane manufacturer’s specifications
  4. Control risks when mobiling ie. Swinging load/hook, in motion forces, mobiling within specification

Read More

Contact Us

 

 

Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.

Phone: 07 5502 8331

Email: admin@onthejobtraining.edu.au

Address: 79 Christensen Road, Stapylton QLD 4207

Usual Business Hours: Mon - Fri 7:00AM - 9:00PM

Enquiry Form