Operate a Boom-Type Elevating Work Platform (under 11m) - TLID3035

EWP course for this specific type of elevating work platform
Call to Book NowBook Online

Unit Names

TLID3035 – Operate a Boom-Type Elevating Work Platform (under 11m)

Course Duration

1 day

Entry Requirement/s


Course Cost*

Full price: $400.00

CSQ funded price: $0 – No out of pocket expense

Night course surcharge: $200

EWP Ticket Training (boom type under 11m), accessible to the Gold Coast & Brisbane

This handy EWP ticket (boom type under 11m) is used in the many sectors that require personnel to perform tasks from height on boom type EWP’s with a boom length less than 11m.  It involves the operation of a telescoping device, hinged device, or articulated device or any combination of these used to support a platform on which personnel, equipment and materials may be elevated to perform work.

This course is for this specific type of EWP and is different to the ‘TLILIC0005 – Licence to operate a boom-type elevating work platform (boom length 11 metres or more)‘ which can result in a WP licenced outcome, that students often partake in also as an expectation of some site supervisors/safety officers.  It is also different to the ‘RIIHAN301E – Operate an elevating work platform‘ which includes use of vertical lift EWP’s and scissor lifts.

The EWP training is conducted in a controlled environment at our training yard in Stapylton, of the Yatala North exit of the M1 halfway between the Gold Coast and Brisbane near the end of the Logan Motorway.

CSQ Provider Logo
NRT high risk work licence logo

Consider enrolling in our EWP Training Combo

Looking to operate more than one type of EWP?


This course will not allow you to operate boom type EWP’s with a boom length 11m or more or vertical scissor lifts. Please check out our EWP training package which includes additional units that can be completed at the same time as this course via the button.

EWP Training Package

Operate a Boom-Type Elevating Work Platform (under 11m) - TLID3035

EWP Ticket Course (boom type under 11m) Overview

This unit involves the skills and knowledge required to operate a boom type elevating work platform less than 11 metres boom length, in accordance with relevant state/territory licence/permit requirements and regulations, in a variety of operational contexts.

It includes inspecting and testing elevating work platform, assessing job and work requirements, planning work and setting up for lift, and carrying out elevation. It also includes implementing planned hazard controls and strategies, and packing up work platform after operations.

Work is performed with limited supervision, and with duty of care responsibility for self and others in achieving the prescribed outcomes.

No licensing, legislative or certification requirements apply to this unit at the time of publication.


EWP Ticket Application

This unit describes the skills and knowledge required to operate an elevating work platform under 11m.

This unit applies to those working in operational roles.

The work required in this unit relates to the National Standard for High Risk Work, but this unit does not provide the licence. Licensing, legislative, regulatory or certification requirements that may apply to this unit can vary between states, territories and industry sectors, and must be sourced prior to applying this unit.

This unit alone does not provide sufficient skill to independently load and unload equipment. To perform this activity safely, personnel must either complete or be assisted by someone who has completed RIIHAN308F - Load and Unload Plant or equivalent.

Further Information is available on the following links:

Performance Criteria

Evidence is required to be collected that demonstrates a candidate’s competency in the applicable units. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

  • Locates and applies relevant documentation, policies and procedures
  • Implements the requirements, procedures and techniques for the safe, effective and efficient completion of operating elevating work platforms
  • Works effectively with others to undertake and complete the operation of elevating work platforms that meet all of the required outcomes
  • Demonstrates completion of operating elevating work platforms that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion

EWP Ticket (under 11m) Course Outline

  • WH&S and legislative obligations
  • Identify work requirements
  • Identify work procedures and instructions
  • Plan and prepare for operating an elevating work platform
  • Conduct work activities from elevating work platform
  • Carry out operation maintenance
  • Clean-up work area

Pre-requisite For This EWP Course

What to Bring

  • Provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
  • Steel cap Boots
  • Safety gloves
  • Hi-Visibility shirt and hard hat with a brim
  • Suitable outdoor work clothing (no singlets)
  • Lunch and water bottle
  • If applicable, any evidence of prior experience e.g old certificates
  • USI Number (Find My USI)

Additional Information

Course Timing:Course days typically run from 6:30am to approximately 3:00pm - Participants are advised to arrive 15 minutes early to sign in.  Training is conducted at the 'On the Job Training' yard at 79 Christensen Rd, Stapylton, QLD, 4207.

*You may be required to start before 6:30am and stay after 3:00pm depending on how long the formal assessment runs for, we will advise of these times on the day of formal assessment.


Training Videos

Why not check out some of our training videos to learn more or get a feel for what to expect with our training.


Brandon Rhea Tower Crane Dogman Dream Featured IMage

Tower Crane Dream: How a Bricklayer Became a Dogman

Sometimes you meet that special student, who you can immediately sense as a trainer that they are not only here to learn; they are metaphorically wearing their career goals on their sleeve. Read about Rhea’s inspiring story here.


Thanks to Paul, Yogi and Matt for their professional and friendly approach and teachings on my above 11m EWP ticket.
I would recommend OTJT to anyone looking for a variety of tickets.

Shawn Condon

Elevating Work Platform Licence Cluster (WP + EWP below 11m), Big Al's Electrical

Trainers were excellent and extremely helpful communicating their experiences and ways of doing things and teaching the correct way! I am 100% satisfied and would definitely recommend for your training!! Thanks guys!
Luke Hines

Dogging (DG), Pensar

I had an absolutely outstanding experience with the entire cew at OTJT.
Very professional and excellent range of experience and skills.

I can reccommend OTJT for having the ability of imparting a great deal of knowledge that will stay with me for the rest of my life. Well done team.

Juan Boulter

Contact Us



Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.



Phone: 07 3807 6061

Email: admin@onthejobtraining.edu.au

Address: 79 Christensen Road, Stapylton QLD 4207

Usual Business Hours: Mon - Fri 6.30AM - 5:00PM

Enquiry Form