DOGGING COURSE

There's no better place to get a dogging ticket
Call to Book NowBook Online

Unit Name

CPCCLDG3001 – Licence to perform dogging

Licence

DG

Course Duration

5 Days

Entry Requirement/s

None

Course Cost*

Full price: $1295.00

CSQ funded price: $331.00

* Night courses incur $250 loading fee

Dogman leave us better prepared for work

  • Small groups, ensuring maximum time with trainers
  • Up to 3 dogging stations means less waiting and more hands-on
  • Online support resources including videos & podcasts

This dogging course, over 5 days, is designed to ensure that participants have the skills and knowledge required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane operator for licensing purposes.

CSQ Provider Logo
Study Gold Coast high risk work licence logo
NRT high risk work licence logo

Unit Name

CPCCLDG3001 – Licence to perform dogging

Licence

DG

Course Duration

5 Days

Entry Requirement/s

None 

Course Cost*

Full price: $1295.00

CSQ funded price: $331.00

* Night courses incur $250 loading fee

Dogman leave us better prepared for work

  • Small groups, ensuring maximum time with trainers
  • Up to 3 dogging stations means less waiting and more hands-on
  • Online support resources including videos & podcasts

This dogging course, over 5 days, is designed to ensure that participants have the skills and knowledge required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane operator for licensing purposes.

NRT CSQ Logos

CPCCLDG3001 - Licence to Perform Dogging

 

COURSE OVERVIEW:

This course, over 5 days, is designed to ensure that participants have the skills and knowledge required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane/ operator for licensing purposes.

Participants will work with the Trainers and Assessors to develop their skills and knowledge, in small groups, ensuring maximum time with trainers. We operate up to three dogging stations at one time for less waiting around time and more hands-on experience. We also give participants the opportunity to operate the mobile cranes to gain an understanding from an operator's point of view as they communicate with their dogman when conducting a lift.

This course option is suitable for participants without access to a workplace to gain experience, or workplaces who don’t have the resources to supervise staff while gaining nominal hours. If at any time during these 5 days the assessor recognises the need for the participant to complete gap training, participants will be given their logbook to gain nominal hours in the workplace prior to attending an assessment.

Watch some real examples of our Dogging Course training on our YouTube Channel.

On successful completion of this course, participants will be able to apply for a High Risk Work DOGGER (DG) Licence. There are costs associated with applying for the licence. Please visit www.worksafe.qld.gov.au for current licence fees.

 

APPLICATION:

This unit specifies the skills and knowledge required to safely perform dogging work. Dogging consists of the application of slinging techniques to move a load, including the selection and inspection of lifting gear, and the directing of a plant operator in the movement of a load when the load is out of sight of the operator.

Dogging work is conducted in the construction industry and other industries where loads are lifted and moved using cranes or hoists.

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of 'CPCCWHS1001 - Prepare to work safely in the construction industry' meets this requirement.

 

ELEMENTS & PERFORMANCE CRITERIA:

  • Plan tasks: including reviewing task instructions,obtaining and interpreting information, identify workplace and task-specific hazards, calculating a load, determing lifting and slinging points, calculating working load limits and determining communication methods with the plant operator.
  • Select and inspect equipment: Select an check risk controls and equipment, PPE, lifting equipment and gear and communication equipment.
  • Setup a task: Establish and maintain communication, ensure risk controls, safety measures and equipment, prepare lifting equipment and gear for safe use, consult with relevant persons to ensure that the load destination is stable, able to bear the load and prepared for safe access and landing, attach and secure lifting equipment and gear to the plant-designated lifting point.
  • Perform task: direct plant designated lifting point/hook, attach and secure lifting equipment and gear to the load, use signals and radio communication methods to direct the load movement, both in and out of sight of the plant operator and conduct a test lift. Direct the movement of the load in accordance with lift plan, including lowering and landing and disconnect lifting gear from the load and direct the positioning of crane or hoist for next task.
  • Pack up job and clean up: Remove excess materials, inspect lifting equipment and gear for defects,store lifting equipment and gear in accordance with workplace requirements and remove risk controls and safety measures and equipment.

Full course outline details available at the Australian Government Training Website

LEARNING OUTCOMES:

  • Communication techniques in the workplace including whistles, hand signals and use of fixed channel two-way radios
  • Calculate rated capacity of lifting equipment
  • Ability to interpret rated capacity and working load limit tags
  • Hazard identification and control
  • Slinging techniques
  • Selection and inspection of lifting equipment
  • Directing crane operators in the moving of loads in a safe manner, using a slewing crane
  • Inspection and care of a wide range of lifting equipment to appropriate Australian Standards and/or manufacturer's specifications.
  • Appropriate mathematical procedures for estimation and measurement of loads
  • Basic knowledge of types of cranes and their functions
  • WHS legislation, standards and codes of practice relevant to the full range of techniques for undertaking dogging activities
  • Load stability and safety factors in line with manufacturer's specifications
  • Understanding of the hierarchy of control

PRE-REQUISITES FOR THIS COURSE:

All participants are required to provide 100 Points of identification (as per Workplace Health and Safety Queensland requirements)
They will also need to have the ability to read, write & understand English.  There are no pre-requisite licences or units of competencies to participate in this course.

LICENSING / REGULATORY INFORMATION:

Legislative and regulatory requirements are applicable to this unit of competency.

This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth, State and Territory HRWL requirements.

The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.

ADDITIONAL INFORMATION:

Course Timing:

Course days typically run from 6:30am to approximately 3:00pm - Participants are advised to arrive 15 minutes early to sign in.  You may be required to start before 6:30am and stay after 3:30pm depending on how long the formal assessment runs for, we will advise of these times on the day of formal assessment.

Course Stucture:

Please note: Competence in a unit does not in itself result in a licence.

Once the trainer believes the participant has demonstrated theoretical and practical understanding of the chosen course (i.e ‘Unit of Competency’), this will be verified with a certificate or what’s known as a ‘Statement of Attainment’ from us, On the Job Training.

They then begin the process of obtaining a licence, via the relevant practical and theoretical assessments or ‘National Assessment Instruments’ (NAI). This is conducted by an assessor on behalf of Workplace Health & Safety Queensland. On successful completion of the mandated assessment, they will be issued with a ‘Candidate Assessment Summary’ (CAS) by On the Job Training.

Upon successful completion of the NAI as stated above, the Office of Industrial Relations Queensland will contact them with instructions on how to apply for the high risk work licence.  For more information about costs associated with the chosen licence visit the Workplace Health & Safety website.

FEATURED CONTENT

Dogging Training Videos

Why not check out some of our training videos to learn more or get a feel for what to expect with our training.

 

Brandon Rhea Tower Crane Dogman Dream Featured IMage

Tower Crane Dream: How a Bricklayer Became a Dogman

Sometimes you meet that special student, who you can immediately sense as a trainer that they are not only here to learn; they are metaphorically wearing their career goals on their sleeve. Read about Rhea’s inspiring story here.

TESTIMONIALS

Great experience, easy to understand and comprehend information being related by the trainer. Stress free learning and training environment. Would recommend to anyone seeking thier high risk work license. Shane and Bruce made the experience enjoyable and easy to get through.

Ryhs Bryden

Dogging (DG), AAM Group

Trainers were excellent and extremely helpful communicating their experiences and ways of doing things and teaching the correct way! I am 100% satisfied and would definitely recommend for your training!! Thanks guys!!
 
 
Luke Hines

Dogging (DG), Pensar

I had an absolutely outstanding experience with the entire cew at OTJT.
Very professional and excellent range of experience and skills.

I can reccommend OTJT for having the ability of imparting a great deal of knowledge that will stay with me for the rest of my life. Well done team.

Juan Boulter

Contact Us

 

 

Contact us any time using the details below. Alternatively, leave us a message using the enquiry form we will get back to you the following business day at the latest.

Phone: 07 5502 8331

Email: admin@onthejobtraining.edu.au

Address: 79 Christensen Road, Stapylton QLD 4207

Usual Business Hours: Mon - Fri 7:00AM - 9:00PM

Enquiry Form