Unit Code + Name
CPCCLRG3001 – Licence to perform rigging basic level
HRW Licence Class
RB
Job Outcome
Basic Rigger
Expected Salary
$95,000-$115,000 pa, $40-50 an hour*
Step up your lifting game – from dogman to rigger, unlock more applications on site
CPCCLRG3001 – Licence to perform rigging basic level
RB
Basic Rigger
$95,000-$115,000 pa, $40-50 an hour*
*SEEK data, Nov 2025
Take the next step from dogging into rigging with this nationally recognised unit. CPCCLRG3001 – Licence to perform rigging basic level covers the skills and knowledge required to safely plan, prepare and complete basic rigging operations involving structural steel, hoists, pre-cast concrete, safety nets, static lines and mast climbing work platforms.
Rigging work goes beyond signalling cranes. It’s about assembling, securing and dismantling loads, plant and structures safely. Training at OTJT’s Stapylton yard gives you hands-on practice with real gear and realistic site setups under the guidance of experienced industry trainers.
How to plan and prepare for rigging work, including reading lift plans, risk assessments and site documentation.
How to inspect, select and use rigging and lifting equipment, such as ropes, pulleys, shackles and slings.
How to erect and dismantle structures and plant, including structural steel, hoists, safety nets, static lines and pre-cast concrete members.
How to establish and maintain exclusion zones to protect personnel and plant during rigging operations.
How to apply load-shifting principles, calculate loads and identify the correct equipment for the job.
How to communicate and coordinate with other workers and crane operators to maintain safe control of lifts.
How to respond to hazards and emergencies in accordance with WHS and site procedures.
Safe setup and execution of basic rigging tasks in accordance with workplace and manufacturer requirements.
Correct application of slinging techniques, load calculations and risk controls.
Team coordination and clear communication during rigging activities.
Compliance with WHS legislation, work instructions and job safety analyses.
Successful participants who meet all Elements and Performance Criteria, and demonstrate the required Knowledge and Performance Evidence, will receive a Statement of Attainment for CPCCLRG3001 – Licence to perform rigging basic level.
This confirms you’ve been trained and assessed as competent in the unit of competency. You’ll then complete a separate licensing assessment under the National Assessment Instruments (NAI) with a SafeWork Queensland approved assessor.
Once both are successfully completed, you can apply to Workplace Health and Safety Queensland for your High Risk Work Licence (RB – basic rigging).
^Blended learning at OTJT means you can knock over your theory online before you arrive, so your time on site is all about getting hands-on and building the skills you need.
Statement of Attainment: Upon achieving competence in this accredited unit of competency, you will be issued a physical and digital copy of a Statement of Attainment for your official records.
Please note that USI transcripts are only updated once a year, so keep it somewhere safe. Don’t worry, though, if you do lose it, get in touch and we can issue a new one.
High-risk work licence (HRWL): Upon successful completion of the national assessment instruments (NAI), the assessor will give you a candidate assessment summary (CAS). This summary will legally allow you to use that licence to perform rigging duties (basic level). Worksafe Qld will then invite you by email to apply for an RB Class HRWL, after which you have just 60 days to apply or will need to be reassessed.
Students with HRWL’s from other states will need to apply to Worksafe Qld then have the option to transfer their qualification to their state HRWL.
According to Seek data as of Nov 2025, the mining, resource and energy sectors are offering the highest wages for dogman/riggers, with the most opportunity available in the Trade Services sectors, with construction 3rd on the list
The lifting game isn’t just about playing with big-boy toys or moving heavy stuff. It’s about teamwork, problem-solving and turning big plans into iconic landmarks. From bridges and stadiums to tower builds and shutdowns, lifting crews are the ones making the big things happen.
Safely, precisely and with a bit of banter along the way.
OTJT founder Matt Nolan started out as a delivery driver before stepping into dogging, then into the seat of mobile and tower cranes.
So what hooked him, line and sinker?
The engineering brilliance of the machines, and the deep satisfaction of being part of something bigger than yourself. He’d never read a book in his life until he found himself reading crane manuals cover to cover.
Ask him now, and he’ll tell you it’s the problem-solving that keeps it interesting. Every lift is different. You’ve got to think on your feet, work closely with your dogger and riggers, and figure out the best way to make it happen.
“There’s no script. Just trust, skill and teamwork.” – Matt Nolan
In South East Queensland, the lifting industry is booming. From the 2032 Brisbane Olympics and renewable energy builds to hospitals, tunnels and high-rise developments, there’s steady work for licensed operators who know their stuff.
If you’re looking for a career that’s hands-on, in demand and genuinely satisfying, this could be it. You won’t just be working with cranes. You’ll be part of the crew that helps build the civil infrastructure for future generations or stadiums that find their place in Olympic history.
“The lifting game is what we love, and we just want to keep on doing it. How do we do that? By training the next generation into in-demand operators through quality training.” – Matt Nolan, OTJ Training founder
1st Day – Welcome!
After a site induction, you’ll learn the fundamentals of mobile crane operating, covering the theory and practical elements of the course. All students have the option to complete the theoretical learning online via e-learning from the moment they are enrolled before course commencement, but is not mandatory.
2nd-3rd Days – Put it into practice!
With the guidance of the training team, your new knowledge and practical skills will be honed and you’ll complete the unit of competency phase in a portfolio of work.
4th Day – Competent? Time for the NAI’s!
Once you’ve achieved competence in the unit, you will prepare and begin the knowledge, calculation and practical tasks as part of the national assessment instruments (NAI’s). Please note you need to successfully complete the knowledge and calculation assessments before moving on to the practical tasks.
5th Day – Assessments Continue!
Once you’ve successfully completed all the NAI’s, you’ll receive a Candidate Assessment Summary (CAS) from your assessor and can then apply for a RB class high-risk work licence (HRWL) from Workplace Health & Safety Queensland. Use this CAS as proof of your successful assessment until your HRWL arrives in the post.
Reassessments:
Should the participant not achieve competence in any of the NAIs, then they will be entitled to no more than one reassessment with no charge. At the RTO’s discretion, any additional reassessments will incur further fees of $250 each, including charges for retraining of $500 if required.
Please use this course structure as a guide. Many factors can influence course timings, such as the size of the group, weather conditions or a student’s time to achieve competence in the unit.
As part of the new Standards for RTOs 2025, all new students must complete a quick LLND (Language, Literacy, Numeracy and Digital) Skills Check before we can confirm enrolment.
It’s not a test, and there’s no pass or fail. It simply helps us understand how best to support the learner before training begins. It only takes around 10 minutes to complete and can be done on any device, including a mobile phone.
Learning | Reading | Writing | Oral Communication | Numeracy | Digital Literacy |
ACSF 2 | ACSF 2 | ACSF 2 | ACSF 2 | ACSF 3 | DigComp A2 |
I was no good at maths at school!
We hear that. Our experience is that students often find the numeracy component a challenging part of this course and HRWL courses in general.
If numeracy is a challenge for you, then we suggest you get started with the trainer video tutorials that walk you through some calculations you’ll need to learn related to load chart and pad sizing calculations. You’ll be sent a link to our ‘Training Tid Bits’ portal as soon as you’re enrolled so you can get ahead before you start training on site.
Check out our FAQ’s on this page below for some more info about our learning resources designed to set up all students for success, regardless of their capabilities, or find our Student Support Policy here.
For more information about the ACSF visit the DEWR website: https://www.dewr.gov.au/skills-information-training-providers/australian-core-skills-framework
CSQ
Bert Training Fund
Should the participant not achieve competence in any of the NAIs, then they will be entitled to no more than one reassessment with no charge. At the RTO’s discretion, any additional reassessments will incur further fees of $250 each, including charges for retraining of $500 if required.
Please use this course structure as a guide. Many factors can influence course timings, such as the size of the group, weather conditions or a student’s time to achieve competence in the unit.
| Item | Full Price | CSQ Co-contribution² | CSQ Admin Fee |
|---|---|---|---|
| Basic Rigging Ticket (RB) | $1,990 | $500 | $50 |
Small Training Provider of the Year
Small Training Provider of the Year
for eligible QLD construction workers
in addition to max time in the seat. Real skills, real fun.
means personalised coaching.
and night classes every 4 weeks—fits your schedule.
including a 101t crawler, 25 t truck crane, 14 t Franna, telehandler and 2 tower cranes for hands‑on training.
midway Brisbane ↔ Gold Coast—easy access.
access to online course materials as soon as you enrol.
leaving your days free to get on with the job.
split your training across days or nights, even multiple weeks.
face-to-face and e-learning elements available.
of students would recommend our training to others.
Source: OTJ Training ASQA Learner Survey 2024
of students said that the training prepared them well for work.
Source: OTJ Training ASQA Learner Survey 2024
Yes, it’s a legislative requirement to hold a current Dogman’s Licence (DG) before partaking in a this course, or at least be working towards obtaining one after successful assessment in the CPCCLDG3001 – Licence to perform dogging unit of competency.
Five days of training & assessment (plus optional online e-learning). Night classes run 5 evenings + 1 Sat morning.
If you’re a FIFO or shift worker, then we can tailor a training and assessment plan to fit around you through our flexible delivery options.
Give us a call on (07) 3807 6061 and we can develop a plan together.
Yes! Night courses run every 4 weeks, Mon-Fri 3:30 pm–9:30 pm and a Saturday morning to allow enough time to complete the NAI assessments.
Construction, trade services including shutdowns, transport & logistics, energy, mining, ports, entertainment, and more.
We provide access to our bespoke virtual reality simulator to practice load control, trainer-led coaching, podcasts, study checks, video tutorials & quizzes.
We can also make reasonable adjustments in training and delivery, provided that it doesn’t unfairly disadvantage other students, or go against the rules of assessment conditions for the training product and national assessment instruments.
Those who struggle with LLN & Digital literacy – you are not alone! If you know you struggle in areas of learning, reading, writing, oral communication, numeracy or digital literacy, be sure to let us know and tell us about any strategies you know that help you.
In our experience, the most effective way to combat any learning difficulty is to be proactive. From the moment our students are enrolled, they will have access to all course materials and learning support resources.
So don’t wait for day 1 – get ahead of the game, minimise stress during the courses and maximise your time doing the fun stuff!
We have weekly intakes. Call us and we’ll do everything we can to accommodate last-minute requests
*SEEK Data, Nov25
^Blended learning at OTJT means you can knock over your theory online before you arrive, so your time on site is all about getting hands-on and building the skills you need.
Request a chat with our friendly
team to inquire about your study options.
