98%
of students would recommend our training to others.
Source: OTJ Training ASQA Learner Survey 2024
98%
of students said that the training prepared them well for work.
Source: OTJ Training ASQA Learner Survey 2024
Get your EWP ticket in QLD. Train on boom lifts over 11m at Stapylton. CSQ funded for eligible workers. Weekly intakes, day & night.
Unit Code: TLILIC0005 – Licence to operate a boom-type elevating work platform (boom length 11m or more)
High Risk Work Licence (WP)
2 days or 3 nights
Construction, civil infrastructure, electrical, painting, signage, maintenance and more
Gain your high-risk licence to operate boom-type EWPs and work safely at height.
TLILIC0005 – Licence to operate a boom-type elevating work platform (EWP) equips you with the knowledge and practical skills to safely plan, operate and shut down boom lifts (such as cherry pickers or knuckle booms with boom length 11 metres or more).
Training is delivered at OTJT’s Stapylton yard using real EWPs in realistic site conditions under the supervision of experienced industry trainers. You’ll learn to assess risk, handle the platform confidently and meet all WHS and licensing requirements.
How to plan and prepare for EWP operations, including reading work instructions, assessing hazards and confirming weather conditions.
How to inspect and maintain EWP components, hydraulics, safety devices and emergency controls before, during and after use.
How to set up the platform safely, confirming ground stability, outriggers, and operating limits.
How to operate the EWP to raise, slew and position personnel and equipment safely at height.
How to communicate effectively with ground crew and other workers using standard signals and radios.
How to implement risk controls for working near powerlines, other plant or structures.
How to respond to malfunctions or emergencies, including platform recovery procedures.
How to complete post-operation tasks, isolate the EWP and record maintenance actions.
Safe and efficient pre-start, operational and shutdown checks.
Confident operation of an EWP within rated capacity and site conditions.
Awareness of WHS responsibilities, emergency procedures and fall-protection systems.
Consistent compliance with workplace procedures, manufacturer specifications and safe work methods.
Successful participants who meet all Elements and Performance Criteria, and demonstrate the required Knowledge and Performance Evidence, will receive a Statement of Attainment for TLILIC0005 – Licence to operate a boom-type elevating work platform (boom length 11 metres or more).
This confirms you’ve been trained and assessed as competent in the unit of competency. You’ll then complete a separate licensing assessment under the National Assessment Instruments (NAI) with a SafeWork Queensland approved assessor.
Once both are successfully completed, you can apply to Workplace Health and Safety Queensland for your High Risk Work Licence (WP).
^Blended learning at OTJT means you can knock over your theory online before you arrive, so your time on site is all about getting hands-on and building the skills you need.
Statement of Attainment: Upon achieving competence in this accredited unit of competency, you will be issued a physical and digital copy of a Statement of Attainment for your official records. Please note that USI transcripts are only updated once a year, so keep it somewhere safe. Don’t worry, though, if you do lose it, get in touch and we can issue a new one.
High-risk work licence (HRWL): Upon successful completion of the national assessment instruments (NAI), the assessor will give you a candidate assessment summary (CAS). This summary will legally allow you to use that licence to elevating work platforms of all types. However, if you don’t partake in training with our scissor lift, then it may be the expectation of site supervisors or employers that you do, and we recommend enrolling in our EWP Training Package alongside this course.
The Office of Industrial Relations will then invite you by email to apply for a WP Class HRWL, after which you have just 60 days to apply or will need to be reassessed.
Students with HRWL’s from other states will need to apply to Safework Qld then have the option to transfer their qualification to their state HRWL.
An EWP licence is one of the most practical licences you can hold in many industries. If you’re working around boom lifts that reach over 11 metres, you’ll need your WP High Risk Work Licence to legally operate them.
Holding your EWP licence gives you the flexibility to work across a wide range of industries: construction, civil infrastructure, electrical, painting, glazing, signage, warehousing, maintenance, events, and more. Wherever there’s work at height, there’s a need for safe, skilled EWP operators.
It’s also what employers and site supervisors expect. Turning up with your EWP ticket shows you’re job-ready, compliant with WHS laws, and serious about safety.
Many trades use EWPs every day, from electricians running cables to painters finishing high facades. Having your licence means having the opportunity to complete work at height with the safety and flexibility of a versatile machine, helping you get the job done quicker and safer. It’s also often a must-have ticket if you’re looking to move into dogging, rigging, or crane work, as access at height is often part of the job.
Want to broaden your skills even further? Stack your WP licence with RIIHAN301E – Operate elevating work platform, which specifically covers scissor lifts and vertical lifts type EWP’s, and add Work Safely at Heights to meet wider site expectations outside the EWP basket. Together, these tickets cover almost every access scenario you’re likely to face on the job.
Your WP licence is also nationally recognised, meaning you can work anywhere in Australia without retraining. And because OTJT delivers the course in just 2 days instead of the industry standard 3, you’ll save time off work while still walking away with the same qualification.
Bottom line: if you want more site options and flexibility, obtaining your EWP licence is a no-brainer for anyone considering work that includes the need to access work areas at height.
1st Day/Night – Welcome: After a site induction, you’ll learn the fundamentals of mobile EWP operating, covering the theory and practical elements of the course. All students have the option to complete the theoretical learning online via e‑learning from the moment they are enrolled before course commencement, but it is not mandatory.
2nd Day/Night – Put it into practice!: With the guidance of the training team, your new knowledge and practical skills will be honed and you’ll complete the unit of competency phase in a portfolio of work.
2nd Day/3rd Night – Assessment – NAI time: Once you’ve achieved competence in the unit, you will prepare and begin the knowledge, calculation and practical tasks as part of the national assessment instruments (NAI’s).
Please note you need to successfully complete the knowledge and calculation assessments before moving on to the practical tasks. Once you’ve successfully completed all the NAI’s, you’ll receive a Candidate Assessment Summary (CAS) from your assessor and can then apply for a WP class high‑risk work licence (HRWL) from Workplace Health & Safety Queensland. Use this CAS as proof of your successful assessment until your HRWL arrives in the post.
Reassessments:
Should you not achieve competence in any of the NAIs, then you will be entitled to no more than one reassessment with no charge. At the RTO’s discretion, any additional reassessments will incur further fees of $250 each, including charges for retraining of $500 if required.
Please use this course structure as a guide. Many factors can influence course timings, such as the size of the group, weather conditions or a student’s time to achieve competence in the unit.
As part of the new Standards for RTOs 2025, all new students must complete a quick LLND (Language, Literacy, Numeracy and Digital) Skills Check before we can confirm enrolment.
It’s not a test, and there’s no pass or fail. It simply helps us understand how best to support the learner before training begins. It only takes around 10 minutes to complete and can be done on any device, including a mobile phone.
The table below summarises the level of the Australian Core Skills Framework (ASCF)* (and DigComp) required for this course.
Learning | Reading | Writing | Oral Communication | Numeracy | Digital Literacy |
ACSF 2 | ACSF 3 | ACSF 3 | ACSF 3 | ACSF 3 | DigComp A2 |
We hear that. Our experience is that students often find the numeracy component a challenging part of this course and HRWL courses in general.
If numeracy is a challenge for you, then we suggest you get started with the trainer video tutorials that walk you through some calculations you’ll need to learn related to load chart and pad sizing calculations. You’ll be sent a link to our ‘Training Tid Bits’ portal as soon as you’re enrolled so you can get ahead before you start training on site.
Check out our FAQ’s on this page below for some more info about our learning resources designed to set up all students for success, regardless of their capabilities, or find our Student Support Policy here.
For more information about the ACSF visit the DEWR website: https://www.dewr.gov.au/skills-information-training-providers/australian-core-skills-framework
CSQ
Bert Training Fund
Should the participant not achieve competence in any of the NAIs, then they will be entitled to no more than one reassessment with no charge. At the RTO’s discretion, any additional reassessments will incur further fees of $250 each, including charges for retraining of $500 if required.
Please use this course structure as a guide. Many factors can influence course timings, such as the size of the group, weather conditions or a student’s time to achieve competence in the unit.
Small Training Provider of the Year
Small Training Provider of the Year
for eligible QLD construction workers
in addition to max time in the seat. Real skills, real fun.
means personalised coaching.
and night classes every 4 weeks—fits your schedule.
including a 101t crawler, 25 t truck crane, 14 t Franna, telehandler and 2 tower cranes for hands‑on training.
midway Brisbane ↔ Gold Coast—easy access.
online theory access as soon as you enrol
day, night, or multi-week delivery
leave your days free to keep earning and the boss happy
plus VR, videos, podcasts and real hands-on practical training
of students would recommend our training to others.
Source: OTJ Training ASQA Learner Survey 2024
of students said that the training prepared them well for work.
Source: OTJ Training ASQA Learner Survey 2024
That depends – you’ll need a WP Licence to operate any elevating work platform with a boom length that can extend to 11m or more.
Otherwise, if you don’t intend to operate this type of EWP, then the RIIHAN301E – Operate an Elevating Work Platform & TLID3035 – Operate a boom-type Elevating Work Platform (boom length less than 11m) might be more suitable for your needs (1-day course).
Most students stack these courses alongside this WP licence course and complete them together in 2 days – check out our EWP Training Package page for more information.
If you’re working or planning to get into high-risk work, then it often requires the use of EWP’s and therefore an expectation of employers, safety officers and site managers, particularly those EWP’s with extended reach.
EWP’s have all sorts of applications in many different industries such as civil infrastructure, electrical, painting, signage, warehousing, maintenance, events, broadcasting, entertainment, telecommunications and more.
That depends – officially, you don’t need a Work Safely at Heights qualification such as a RIIWHS204E while operating an EWP, as safe use of harnesses, fall arrest systems and height safety while operating an EWP within the confines of the basket is covered in the training.
However, other applications while working at height are not covered, nor would the training sufficiently include a scenario whereby an individual disembarks from the EWP basket at height.
They would require further training at height and should only access site areas via a personnel and materials hoist or scaffolding on a construction site.
The point is, any work being conducted at height outside an EWP should have the appropriate dedicated training as per site procedures.
2 days or 3 nights including assessment. The industry standard is 3 days, but we operate longer days so you can get done sooner and have less time off!
Yes – over 3 nights including assessment. Evening intakes are available every 4 weeks.
Yes indeed! Eligible workers pay $250 instead of $750.
Eligibility criteria apply, subject to CSQ funding availability. $50 application fee is payable.
Yes – you can bundle with RIIHAN301E – Operate elevating work platform,. This unit also includes competency in operating other types of EWPs such as scissor lifts and vertical lifts, making it a great option if you want broader skills or need to meet site requirements for multiple machine types.
It is often an expectation of site policies and procedures to do so.
You can complete this course alongside the WP licenced course at no extra cost. See our EWP Training Package page for more information.
Steel cap boots, PPE, 100 pts of ID, and your USI.
*SEEK Data, Nov25
^Optional pre-course learning available to help you prepare before attending the course.
+Includes a Saturday morning to complete assessments.
Ask us a question or request a chat with our friendly team on
07 38076061 or complete the form to enquire about your study options.
Or, ready to book?
Got a quick question? Complete the form below, jump on Live Chat, or Click to Call our team during business hours.
Need a fast response? We keep an eye on enquiries over the weekend too.
